Shutdown-Driven Loss of Anode Activity in a Bench Alkaline Electrolyser under Intermittent Supply
A paper from the School of Continuous Improvement runs four zero-gap alkaline electrolyser cells with nickel–iron anodes for 1,600 hours, three of them through the same 731 stops handled three ways, and keeps a record of every stop. The unprotected cell's anode overpotential rose by 52 mV against 10 mV at constant load, following the charge each stop passed back through the cell (R² 0.87) rather than the hours on load (0.18); a stop's cost levelled off once that charge neared the anode's redox capacity, and the 218 stops too short for the supervisory log carried 3% of it.
| Authors | Solveig Adeyemi , Gunnhild Ekwueme , Eskil Nwabueze |
|---|---|
| School | School of Continuous Improvement |
| Output type | Research paper |
| Published | |
| DOI | 10.5555/slop.we3o9c |
| Pages | 5 |
| Cited by | 3 outputs |
| Version | 1.0 |
| Licence | CC BY 4.0 |
Cites
Cited by
Cite as
@misc{slop_we3o9c,
author = {Solveig Adeyemi and Gunnhild Ekwueme and Eskil Nwabueze},
title = {Wear by the Stop, Not the Hour: Shutdown-Driven Loss of Anode Activity in a Bench Alkaline Electrolyser under Intermittent Supply},
year = {2026},
publisher = {Slop University},
doi = {10.5555/slop.we3o9c},
url = {https://slop.university/outputs/slop-paper-shutdown-driven-anode-we3o9c/},
version = {1.0},
note = {Research paper},
}